Vision Hi-Tech VPD200SM2i Guía de instalación descargar pdf (Pagina 6)

Page 6 / 15

5. Cable Connection

• Dome Cover

Do not detach protection vinyl from dome cover before finishing all

installation process to protect dome cover from scratches or dust.

• DIP Switch

Sets up camera ID and protocol.

• Drop Prevention

Spring

This part keeps the camera from dropping during installation and

maintenance. After install the Bracket, please, hang the spring to

the drop prevention hook of main body as shown in picture for

further tasks.

• Mounting Screw

Hole

This hole is for screws that assembles the main body with a

bracket.

• IP Reset Switch

Reset its network configuration to the factory defaults. You will lose

all data that had been entered previously. To initialize the system

to the factory default, press the reset button for more than 5

seconds.

• LAN Port

Used for the Ethernet connection

• Audio Port

Used for the audio in/out connection.

• Video (BNC)

Used for the composite video out or HD-SDI video out connection

according to models

• Main Connector

Used for the power wire, the RS-485 communication cable, alarm

in/out connection cable.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Sin comentarios

Vision Hi-Tech VPD200SM2i Guía de instalación Pagina 6